A. T. A. recommended Linksys PAP2 |
Connect the unit to your network via the RJ45 port behind the unit. Power up the unit.
Plug in a telephone in the RJ11 port 1 behind the unit (any one will do) Be prepared with pen and paper, and proceed with the following:
1. Pick up phone connected to “Phone 1” port of the PAP2, dial **** . You will hear “Linksys configuration menu.”
2. Press the keys 110# on your analog phone. The system will then read back the IP address of your PAP2. Please write this down.
Prepare your device to work with the Divafone network:
A. Open your configuration page. To do so, type the following into your web browser: http://aaa.bbb.ccc.ddd/admin/advanced
where “aaa.bbb.ccc.ddd” represents the IP address of your PAP2.
B. On the configuration page click on “Admin Login” and then “switch to advanced view”
C. Click on the “Line 1” tab link. You will see a configuration as pictured in the screen shot below
|
